DPA SC4098 D:screet Supercardioid Mic, Black, 30CM Gooseneck ex display

Ex Display Mic, in as new condition comes with DPA full  warranty  

Features
• Outstanding audio quality
• Wireless podium mic capability
• Highly directional very isolated
• High rejection of radio frequency interference
• Sleek design

Exceptional audio quality
Clean, intelligible sound is key when a single speaker is addressing a crowd. DPA Microphones d:screet Podium Microphones deliver high intelligibility with their controlled directionality and rejection of background noise. DPA Microphones superb DPA quality and remarkably clean sound is available at a modest price level in podium microphones based on DPA Microphones d:screet miniature series. These microphones include the thoroughly tested d:screet Miniature capsule and interference tube technology.

Wireless podium mic capability with their MicroDot versions
DPA Microphones d:screet Podium Microphones are available with their MicroDot connector making them well suitable for a wireless Podium Mic setup. No more cables across the stage, simply connect the Podium Mic with a wireless transmitter and your podium setup is more flexible than ever.

Different lengths for different tasks
All d:screet Podium Microphones provide linear, natural sound combined with elegant visual design. Boom pole lengths and gooseneck choices can be tailored for specific requests. Standard types are 30 cm and 45 cm with top and bottom goosenecks which are available in black. The short 15 cm variant is ideal for table or hanging applications and comes in booth black and white. Speech intelligibility is extraordinary high and clarity of voice is definitely in its own league. Visual elegance is held through the thinnest pole available and a sleek Scandinavian design. The MicroDot d:screet boom poles can even run wireless through the DPA adapter range.

Directional characteristics

Supercardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency range

20Hz-20kHz
+/- 2dB, 20cm distance:
100Hz-15kHz with 3dB soft boost at 8-15kHz
Permanent 2nd order low-cut filter (-3dB at 80Hz)

Sensitivity

Nominal +/-3dB at 1kHz: 16mV/Pa
-36dB re. 1V/Pa

Equivalent noise level

A-Weighted:
Typical: 23dB (A) re. 20MuPa
Maximum: 26dB (A)

ITU-R BS.468-4:
Typical: 35dB
Maximum: 38dB

S/N ratio

(A-weighted) re. 1kHz at 1Pa (94dB SPL): 71dB(A)

Total Harmonic Distortion (THD)

< 1 % up to 125dB SPL peak
< 1 % up to 122dB SPL RMS sine

Dynamic range

Typical: 102dB

Max. SPL

Peak before clipping: 136dB

Output impedance

100Ohms

Minimum load impedance

2kOhms

Cable drive capability

Up to 984' / 299.93m

Output balance principle

Impedance balancing with Active Drive

Common Mode Rejection Ratio (CMRR)

> 50dB

Power supply

48V phantom power +/- 4V for full performance

Current consumption

3.5mA

Connector

MicroDot

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40 to 45 deg. C / -40 to 113 deg. F

Microphone length

30cm / 11.81"

Weight

80g / 2.82oz